速報APP / 工具 / PE Butt Weld

PE Butt Weld

價格:免費

更新日期:2014-09-09

檔案大小:545k

目前版本:3.0

版本需求:Android 2.2 以上版本

官方網站:http://paramountengineering.com.au

Email:cariordan69@gmail.com

聯絡地址:PEButtWeld PO Box 481 Ormeau Qld 4208 Australia

PE Butt Weld(圖1)-速報App

This is a simple little app that calculates the welding times and pressures when butt welding PE pipe together. The outside diameter - OD (mm), standard dimension ratio - SDR and hydraulic cylinder area (mm2) are required to be entered in by the user to produce these calculations. The SDR can also be calculated if the water pressure class - PN and the material type (PE80 or PE100) is known. The PN to SDR conversion table is also provided in the main menu selection.

I wrote this app to double check my onsite welding calculations when time is of the essence and the client is counting the seconds.

Note: This app was written essentially for a smart phone to be used on site.

PE Butt Weld(圖2)-速報App

Version 2 Uploaded 6 Sept 2014 (not shown in screenshots)

- Adapted App for use on older phones (Android 2.2, API Level 8, Froyo)

- Added allowance calculations including:

PE Butt Weld(圖3)-速報App

Gap

Misalignment

Heater plate temperature

PE Butt Weld(圖4)-速報App

Minimum weld width after cooling

Maximum weld width after cooling

PE Butt Weld(圖5)-速報App